TWN 5100/3
Round Steel Chains for Loading Wagons and Dung Spreaders

The round steel chains TWN 5100/3 are used in the loading floors of loader wagons and dung spreaders in the agriculture industry. The narrow dimensional tolerances of the calibrated round steel chains allow them to be used on loading floors with parallel 2 or 4 running chain strands (in pairs).

The manufacturing and testing requirements are based on the specifications of the manufacturer THIELE.

Round Steel Chains for Loading Wagons and Dung Spreaders

Properties

Dimension [mm]	Article-No.	Tensioner under straight load [kN] max.	Proof Force [kN] min.	Breaking Force [kN] min.	Measuring Length (11 x p)			Weight app. [kg/m]
Dimension [mm]	Article-No.	Tensioner under straight load [kN] max.	Proof Force [kN] min.	Breaking Force [kN] min.	[mm]	permissible tol.		Weight app. [kg/m]
8 x 22,8	F05011	18	45,2	64,2	250.8	+1,1	-0,6	1.40
8 x 24	F05031	18	45,2	64,2	264.0	+1,2	-0,6	1.35
8 x 28	F05062	18	45,2	64,2	308.0	+1,4	-0,7	1.30
8 x 31	F05051	18	45,2	64,2	341.0	+1,5	-0,8	1.24
9 x 27	F05072	22,4	57,3	81,3	297.0	+1,3	-0,7	1.80
9 x 31	F05081	22,4	57,3	81,3	341.0	+1,5	-0,8	1.64
9,5 x 27	F05121	25	63,8	90,6	297.0	+1,3	-0,7	2.00
10 x 26,5	F05151	28	70,7	100	291.5	+1,3	-0,7	2.25
10 x 28	F05155	28	70,7	100	308.0	+1,4	-0,7	2.30
10 x 30,5	F05171	28	70,7	100	335.5	+1,5	-0,8	2.20
10 x 31	F05181	28	70,7	100	341.0	+1,5	-0,8	2.10
10 x 35	F05195	28	70,7	100	385.0	+1,7	-0,9	2.10
10 x 38	F05201	28	70,7	100	418.0	+1,9	-1,0	2.08
11 x 31	F05221	33,5	85,5	121	341.0	+1,5	-0,8	2.64
11 x 35	F05230	33,5	85,5	121	385.0	+1,7	-0,9	2.49
12 x 36	F05251	40	102	145	396.0	+1,8	-0,9	3.20
12 x 42	F05261	40	102	145	462.0	+2,1	-1,1	3.00
13 x 36	F05285	47,5	119	170	396.0	+1,8	-0,9	3.80
13 x 45	F05291	47,5	119	170	495.0	+2,2	-1,1	3.45
13,2 x 62	F05302	47,5	123	175	682.0	+3,1	-1,6	3.21
14 x 42	F05331	53	139	197	462.0	+2,1	-1,1	4.12
14 x 50²⁾	F131071	53	139	197	550.0	+1,1	-1,1	4.00
14 x 50 ^{2) 3)}	F131002	65	162	240	550.0	+1,1	-1,1	4.00
16 x 56	F05355	71	181	257	616.0	+2,8	-1,4	5.40
Note: The length tolerance of chain strands for each strand is +0,3 / -0,0%. The length tolerance of matched pair chain strand is 0,1%. For the measurement of the length of matched pair chain strands, each chain strand must be free of torsion and strained or hanged with 1% of the corresponding breaking force. 2) Dimensional tolerances according to DIN 22252 3) Increased tensile stress 200 N/mm², production test stress 500 N/mm² and breaking stress 720 N/mm²